Aerospace SPC software for tight tolerances and zero guesswork.
Keep key characteristics in control, prove capability to your customer and trace every reading back to the lot and the gauge that took it. No spreadsheets required.
For aerospace suppliers and precision machine shops working to AS9100.
Cp & Cpk trending
Cp & Cpk trending
8 Nelson Rules
8 Nelson Rules
Audit-ready PDF reports
Audit-ready PDF reports
Cloud based
Cloud based
Lot traceability
Lot traceability
Traceability of measurement devices
Traceability of measurement devices
THE PROBLEM
When capability lives in spreadsheets,
proof is hard to find.
Scattered records slow you down when a feature starts to drift or an auditor asks how you know it's under control.
Drift goes unnoticed
A slow drift on a critical dimension can run for hours before anyone plots the numbers.
Capability is a one-off
Cpk gets worked out for the customer submission, then nobody looks again until the next audit.
Audits become a paper chase
Pulling measurement records, capability and corrective actions together for an AS9100 audit can eat days.
Gauge recalls are a nightmare
When a gauge fails calibration, finding every part it measured means digging through every record.
We built Easyr for environments where every measurement needs a story behind it, plus we made it simple for operators to use.
SAMPLING BUILT FOR YOUR LINES
Sampling plans that match your
inspection plan.
Schedule checks by time, trigger them by quantity, or use ASQ tables to guide sample sizes for a lot.
Sample by time
Set a repeating interval, say every hour on a machining run, so checks happen right through the shift.
Check Schedule
Every 20 minutes
• 08:00 • 08:20 • 08:40 • 09:00
Sample by quantity
rigger a check after a set number of parts, like every 25th part off the machine.
Production trigger
Every 25 parts
• Production Count → Check due
Build your own tolerance tables
Set nominal and tolerances for each part and feature, once.
Use table-based plans
Apply an ASQ sampling table to link lot size to the sample required.
ALERTS THAT MAKE SENSE
Know the moment a key
characteristic starts to move.
Running precision work takes focus, so Easyr flags things the moment you need to know.
N1
Point outside the limits
Something unusual happened on this run. Investigate before continuing
N2
Run on the same side
Several readings in a row sit on the same side of the middle. The process may have shifted.
N3
Steady drift
Readings keep climbing or falling. Something is slowly changing.
Active
Waiting
Due Now
Capability you can show your customer
See Cp, Cpk and Ppk for every lot and how they trend over time, ready for customer reviews and AS9100 evidence.
Which lot? Which gauge?
Which shift?
The traceability bits are built in, so nobody needs to go digging.
Link Bluetooth gauges to capture readings instantly, with no typing errors.
Questions people ask
Anything else? Ask us in the demo
No. They tap in a reading and Easyr does the maths. The charts and rules are for your quality team.
Ready to make quality management easyr ?
Book a personalised demo and see Easyr SPC in action.
